HPLED II C6 (Colour RGBACL)
LED Re-Lamping for Source Four Profile
Lites HPLED II C6 is a revolutionary re-lamping engine designed to replace and convert conventional HPL 575/750W tungsten lamps used in original ETC Source Four profile, into a fully LED profile-luminaire. The integral set of achromatic lenses, set in the optical system, enhances brightness and gives consistency of light distribution across the illuminated surface. The HPLED II C6 is powered by a high-power, RGBACL-colored, red, green, blue, amber, ciano, lime light-emitting diode (COB) that allows for an infinite color gamut. HPLED II C6 has 10 preset whites from 2300°K to 10000°K with minimum CRI from 93 to 98 depending on the white selected. Its advanced electronics allows for the emulation of a 3200°K halogen lamp during the dimming phase. The on-board display board operates the fixture via ready RDM and or DMX Protocols. The rear section of the HPLED II C6 embeds functions to facilitate fixture operations, such as convenient IN/OUT 5-pin XLR and Power-Con connectors. Made in Italy. Designed and manufactured by Lites srl.
Technical Specifications
- Power Supply: 100–240V ~ 50/60Hz auto-setting (single-phase)
- Maximun power consumption 170W
- LED colour RGBACL(Red 1400 lm, green 1500 lm, blue 600 lm, amber 2300 lm, cyan 1400 lm, lime 3600 lm)
- Led emission: 10800 lm total (see manufacturer’s specifications)
- CCT 2300°k to 10.000°k
- CRI from 93 to 98 depending on the selected white
- Emulation of 3200° k halogen lamp during the dimming phase
- 7 operating modes, 16 bit dimming, rgb, HSI
- Control of LED frequency: selection of LED frequency refresh
- Dimming curves control: selection of four dimming curves control
- Manual operations: via keys provided on the display
- Double lens optics with multiple anti-reflection coatings
- Protection grade: IP20 (HOUSE HPLED in original ETC S4 only)
- Working position: any (HOUSE HPLED in original ETC S4 only)
- User's interface: 4-digit display and 4 keys
- Power connectors: IN - OUT power-con Neutrik connectors
- Data connectors: IN - OUT Neutrik XRL 5
- Data Protocols: DMX 512 and/or RDM ready
- Fan control: fan speed adjustments
- Net weight: 2,49Kg
- Packed weight: 3,3Kg
- Packaging volume: 0,012m³
Compliant to:
Download
Photometric data with RGBACL matrix with white 3200°K CRI 98
| Distance m | 4 m | 6 m | 8 m | 10 m | 12 m | 14 m | |
|---|---|---|---|---|---|---|---|
| Source Four optics 19° | Lux | 6350 | 2822 | 1588 | 1016 | 706 | 518 |
| Diameter Ø m | 1.20 | 1.80 | 2.40 | 3.00 | 3.60 | 4.20 | |
| Source Four optics 26° | Lux | 2953 | 1313 | 738 | 473 | 328 | 241 |
| Diameter Ø m | 1.65 | 2.48 | 3.31 | 4.41 | 4.97 | 5.79 | |
| Source Four optics 36° | Lux | 1688 | 750 | 422 | 270 | 188 | 138 |
| Diameter Ø m | 2.32 | 3.48 | 4.64 | 5.81 | 6.97 | 8.13 | |
| Source Four optics 50° | Lux | 750 | 333 | 188 | 120 | 83 | 61 |
| Diameter Ø m | 3.73 | 5.59 | 7.46 | 9.32 | 11.19 | 13.05 |
Photometric data with RGBACL matrix with white 5600°K CRI 98
| Distance m | 4 m | 6 m | 8 m | 10 m | 12 m | 14 m | |
|---|---|---|---|---|---|---|---|
| Source Four optics 19° | Lux | 6710 | 2982 | 1678 | 1074 | 746 | 548 |
| Diameter Ø m | 1.20 | 1.80 | 2.40 | 3.00 | 3.60 | 4.20 | |
| Source Four optics 26° | Lux | 3172 | 1410 | 793 | 508 | 352 | 259 |
| Diameter Ø m | 1.65 | 2.48 | 3.31 | 4.41 | 4.97 | 5.79 | |
| Source Four optics 36° | Lux | 1828 | 813 | 457 | 293 | 203 | 149 |
| Diameter Ø m | 2.32 | 3.48 | 4.64 | 5.81 | 6.97 | 8.13 | |
| Source Four optics 50° | Lux | 797 | 354 | 199 | 128 | 89 | 65 |
| Diameter Ø m | 3.73 | 5.59 | 7.46 | 9.32 | 11.19 | 13.05 |
Dimensions
The information contained in this document has been carefully drawn and checked. However, the manufacturer shall not be liable for any inaccuracy or mistake. Lites srl reserves the right to modify or make any functional change at any time without notice.
